DIPOL Ireland

My Cart

You have no items in your shopping cart.


IP Cameras

2 MP

Cube IP Camera: Hikvision DS-2CD2420F-IW (2MP, 2.8mm, 0.028 lx, IR up to 10m, WiFi, PoE, PIR, video analytics)

Code: K1717

Be the first to review this product

Availability: In stock

Including VAT 230.02 EUR Disc. 0 %


View of the camera
View of the camera
Side and rear views
View of the included accessories
View of the included accessories
View of the packaging
View of the packaging
Key features:
  • Resolution: 2 MP (1920 x 1080)
  • 2.8 mm / 98.5° lens
  • Mechanically switching IR filter
  • H.264/MJPEG video compression
  • Built-in loudspeaker and microphone - possibility of two-way video conferencing
  • Connection via LAN or Wi-Fi
  • Access via Ezviz, Hik-Connect
  • Support for microSD/microSDHC/microSDXC cards up to 128 GB
  • IR range up to 10 m
  • Built-in PIR motion sensor
  • Alarm input and output
  • Intelligent image analysis (virtual line crossing, intrusion detection)
  • Video enhancement functions: 3D-DNR, dWDR
  • Region of interest (ROI)
  • Power: 12 VDC or PoE (802.3af)
The DS-2CD2420F-IW K1717 camera comes from a new series of Hikvision products - HiWatch. This series of low-budget devices, IP cameras and IP NVRS, is dedicated for anyone who wants to build low-cost high-resolution IP CCTV system. The DS-2CD2420F-IW camera has been equipped with high quality 2 MP CMOS sensor providing perfect video even in low-light conditions and without visible lighting (in IR mode, range of the built-in illuminator up to 10 m). The camera has intelligent analysis functions such as line crossing and intruder detection in a specific area. The user can setup a region of interest (ROI) - part of the image with increased video transmission parameters. The camera has been designed for indoor applications. It can be powered conventionally with 12 VDC or using PoE option (compatibility with 802.3af).
The built-in microphone and speaker of the camera can be used for videoconferencing. The minimum requirements for the other side include a suitable PC with microphone and speaker/headphones, capable of receiving the video and voice via a browser or dedicated application.
The built-in PIR motion sensor provides more reliability than video motion detection, especially in the case of an environment with reflections, objects moving in the wind, moving pets etc. The detection of motion by the PIR sensor can trigger e.g. recording of the video from the camera on a memory card (the camera supports microSD cards up to 128 GB) or by an NVR, or can activate the alarm output.
Thanks to H.264 compression, the data stream is minimized. The user can configure two independent streams (primary and secondary), as well as choose H.264 or MJPEG compression and limit the bandwidth within 32 kb/s to 8 Mb/s range.
The camera can be connected wirelessly (Wi-Fi, IEEE802.11 b/g/n) or via Ethernet port. The use of wireless connection is not recommended for applications in professional CCTV systems with video recording, due to a risk of interference and the influence of obstacles. The wireless connection is convenient in the case of live monitoring and videoconferencing.
The users of Hikvision IP cameras and NVRs can use free Hik-Connect service, which provides remote access to the devices in the case of dynamic IP addresses, or allows for the use of domain names in web browsers. It is necessary to create Hik-Connect account and add the camera. The service can be operated via a web browser or applications (for a PC and smartphone).
Ezviz (EasyVision) is a free service which can be activated in Hikvision NVRs and IP cameras. This free service allows less advanced users to easily access to the video from the cameras via the Internet, without forwarding router ports. To enable remote access, the user should only connect the device to the network (which requires a valid IP address and appropriate gateway settings). The next step is the creation of user account at the www.ezviz7.com website. The account can accommodate devices in a local area network (with activated Ezviz service). The devices will be available from anywhere via the Internet.
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.
Video system
Housing type
Compact (cube)
Frame rate
25 fps at 1920x1080 and lower resolutions
Image sensor
1/2.8" Progressive Scan CMOS
Sensitivity 0.28 lx @F2.0 with AGC
0 lx in IR mode
Lens2.8 mm / 98.5°
Mechanically switching IR filter
IR range
up to 10 m
Brightness control
Sharpness control
Video processing
Alarm eventsMotion detection, dynamic analysis, tampering
Intelligent image analysis
Line crossing
1 line
Intruder detection
1 region
ROI1 region
RecordingNVR, memory card, FTP/NAS server
Network interface
RJ-45 10/100Base-T
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Wi-Fi (2.4 GHz)

IEEE802.11b, 802.11g, 802.11n

PIR sensor (angle / range)
 80°/ 10 m
Power12 VDC ± 10%
PoE IEEE 802.3af
Power consumption
5 W (max 7 W with IR)
Operating temperature range
-30°C ...  60°C
Dimensions72.3 x 89.9 x 131.3 mm
Weight0.4 kg

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.