DIPOL Ireland

My Cart

You have no items in your shopping cart.

Checkout

root-catalog

OFFER

HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7208HUHI-K2 (8ch, 5MP@12fps, H.265, HDMI, VGA)

Code: M75509

Be the first to review this product

Availability: In stock

Including VAT 618.43 EUR Disc. 0 %

Details

Array
Array
Array
Array
Array
Front view
Front view
Rear view
Rear view
View of the included remote control
View of the included remote control
Array
Array
View of the included accessories
Key features:
  • HD-TVI: 5 MP recording resolution at 12 fps, 3 MP at 18 fps, 1080p and lower resolutions at 25 fps
  • HD-CVI, AHD: 2 MP at 25 fps
  • Support for 8 HD-TVI, AHD or CVBS cameras and two IP cameras (Hikvision or others by Onvif, max. 6 MP)
  • H.265 and H.265+ video compression
  • Access and management via IE browser
  • Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth
  • Parallel operation of HDMI (4K, 30 Hz) and VGA (2K, 60 Hz) outputs
  • Independent CVBS output
  • Searching recordings by alarm events
  • VCA image analysis function
  • Digital zooming during live monitoring and playback
  • Synchronous playback from 8 channels
  • Support for IPv4, IPv6,
  • Monitoring the statuses of LAN, cameras, hard drives
Hikvision DS-7208HUHI-K2 is an 8-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, AHD, CVBS and IP standards. The maximum recording resolution is 5 MP @ 12 fps. The DVR can also record video with 3 MP image resolution at 18 fps. In the case of 1080p / 960x1080 / 720p / VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.
H.265 video compression
Array
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use H.265 method. Compared with the predecessor (H.264), H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Array
Special recording modes
The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
Intelligent image analysis
Each channel has the possibility of independent settings for intelligent image analysis. The image analysis includes detection of virtual boundary line trespass (including direction), and detection of intrusion to an area of a square shape. The image quality diagnostic function can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.
Refined client software
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
View of the control panel of the iVMS-4200 application
View of the control panel of the iVMS-4200 application
iVMS-4500 is a mobile application for smartphones running Android, iOS or Windows Phone operating systems. It can be used for live monitoring and playback of images from DVRs, NVRs, IP cameras via Wi-Fi, 2G or 3G networks.
Device Information window  in the iVMS-4500 app
Device Information window in the iVMS-4500 app
Live View window  in the iVMS-4500 app
Live View window in the iVMS-4500 app
Working in the cloud
Array
Ezviz (EasyVision) is a free service which can be activated in Hikvision NVRs and IP cameras. This free service allows less advanced users to easily access to the video from the cameras via the Internet, without forwarding router ports. To enable remote access, the user should only connect the device to the network (which requires a valid IP address and appropriate gateway settings). The next step is the creation of user account at the www.ezviz7.com website. The account can accommodate devices in a local area network (with activated Ezviz service). The devices will be available from anywhere via the Internet.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
Main window of SADP application
Main window of SADP application
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.
Specifications:
Name/modelDS-7208HUHI-K2
CodeM75509
Video formats
HD-TVI, AHD, CVBS, IP
Video inputs
BNC x 8 + 2x IP channel
HDMI/VGA resolutions
3840×2160, 30 Hz (HDMI only) 
2560×1440, 60 Hz
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768
Audio input / output connectorsRCA 4 / 1
Alarm inputs / outputs
8 / 4
Alarms and exceptionsMotion detection, video loss, camera tampering
Live monitoring
25 fps
Recording options5 MP
10 fps
3 MP
15 fps
1080p25 fps
720p25 fps
WD1/4CIF25 fps
CIF
25 fps
Video bit rate range (single channel)32 kbps - 10 Mbps
Audio bit rate64 kbps
HDD capacity & interface2x max 8 TB SATA HDD
S.M.A.R.T. monitoring toolsYES
NAS/SAN compatibility
YES (NAS)
External ports
1x USB 3.0, 1x USB 2.0; RS-485; RJ-45 (10M/100M/1000M Auto)
Secondary stream
WD1, 4CIF, CIF, QVGA, QCIF
Network protocols
TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer
PTZ protocols
Yes
ArchivingUSB storage device, remote server
Power input
12 VDC / 3 A (dedicated PSU)
Power consumption
<20 W (without HDD)
Operating temperature-10°C...55°C
Operating humidity
10%...90%
Dimensions ( W x D x H )380 × 320 × 48 mm

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.