DIPOL Ireland

My Cart

You have no items in your shopping cart.



Hybrid DVRs

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7324HQHI-K4 (24-ch, 4MP Lite, 15fps, H.265, HDMI, VGA)

Code: M75620

Be the first to review this product

Availability: Out of stock

Including VAT 1,759.67 EUR Disc. 0 %


Front view
Front view
Rear view
Rear view
View of the included remote control
View of the included remote control
View of the included accessories
View of the included accessories
View of the included accessories
View of the included accessories
Key features:
  • Recording of HD-TVI video with 4 MP Lite (1280 x 1440) or 1080p resolution at 15 fps; 720p and lower resolutions at 25 fps
  • Recording of HD-CVI, AHD video with 2 MP resolution at 15 fps
  • Channels 1, 2, 3, and 4 can support 3 MP cameras at 15 fps
  • 1080p lite recording mode: 960x1080 at 25 fps
  • Support for 24 HD-TVI, AHD, HD-CVI or CVBS cameras and 8 IP cameras (max. 6 MP, Hikvision or Onvif-compliant)
  • H265 and H265+ video compression
  • Management via IE browser
  • Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth
  • Parallel operation of HDMI1 and VGA outputs up to 1920 x 1080 @ 60 Hz and independent HDMI2 output (4K @ 30 Hz / 2K @ 60 Hz)
  • CVBS video output
  • Searching recordings by alarm events
  • VCA functionality
  • Digital zooming during live monitoring and playback
  • Synchronous playback from 16 channels
  • Support for IPv4, IPv6,
  • Monitoring the statuses of LAN, cameras, hard drives
  • Support for POS.
Hikvision DS-7324HQHI-K4 is a 24-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, HD-CVI, AHD, CVBS and IP standards. The 24 channels can record images from 4 MP Lite (1280 x 1440), 1080p or 720p cameras at 15 fps. In the case of channels 1, 2, 3 and 4, the maximum recording resolution is 3 MP @ 15 fps. For VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps. Additionally, the DVR can support up to 8 IP cameras (after switching off analog channels, the number of IP channels can be extended up to 32).
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use H.265 method. Compared with the predecessor (H.264), H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Special recording modes
The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
Intelligent image analysis
Four selected channels have the possibility of independent settings for intelligent image analysis (VCA). The image analysis includes detection of virtual boundary line trespass (including direction), and detection of intrusion to an area of a square shape. One channel allows for detection of quick change in a scene.
VQD (video quality diagnostic function) can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.
Refined client software
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
View of the control panel of the iVMS-4200 application
View of the control panel of the iVMS-4200 application
Hik-Connect is a mobile application, intended for smartphones running Android or iOS operating systems. It can be used for remote live viewing of images from DVRs, NVRs, network cameras via Wi-Fi, 2G or 3G networks, and for playing back recorded video files. The application connects with the devices by IP addresses and/or through the P2P cloud.
The start menu of the Hik-Connect app  with live view thumbnail
The start menu of the Hik-Connect app with live view thumbnail
The live view screen
The live view screen
Working in the cloud
Hik-Connect is also the name of network service intended for Hikvison devices. The service is based on data processing in the cloud and integrates the following functions:
  • Remote access through the cloud
  • It allows access to the device without having an external IP address and when simplicity is the most important thing. Only the basic configuration of the network is required. The application on a PC or smartphone connects with the device via P2P cloud service.
  • DDNS server
  • DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. The condition for using DDNS is having a public IP address and providing access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is possible via a web browser, client application on a PC and on smartphones.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
Main window of SADP application
Main window of SADP application
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.
Video formats
Video inputs
24 x BNC + 8 x IP channel
Video compression
HDMI2 video output4K:3840×2160, 30 Hz
2K: 2560×1440, 60 Hz
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768
HDMI1/VGA video output1080p: 1920 x 1080 and lower resolutions
BNC video output
4CIF: 704 x 576
Two-way audio (IN/OUT)1/1 (RCA)
Audio inputs4 x RCA
Alarm inputs / outputs
16 / 4
Alarms and exceptionsMotion detection, video loss, camera tampering
Live monitoring
25 fps
Recording options5 MP
3 MP
15 fps (channels 1...4)
1080p15 fps
720p25 fps
WD1/4CIF25 fps
25 fps
Video bit rate range (single channel)32 kbps - 4 Mbps
Audio bit rate64 kbps
HDD capacity & interface4x max 8 TB SATA HDD
S.M.A.R.T. monitoring toolsYES
NAS/SAN compatibility
External ports
1x USB 3.0, 2x USB 2.0; RS-485; RS-232, RJ-45 (10M/100M/1000M Auto); keyboard (KB)
Secondary stream
Network protocols
TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP, Hik-Connect, ONVIF
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer
PTZ protocols
ArchivingUSB storage device, remote server
Power230 VAC
Power consumption
<45 W (without HDD)
Operating temperature-10°C...55°C
Operating humidity
Dimensions ( W x D x H )440 x 390 x 70 mm
<7 kg

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.